ADCMT 6253 - Random Sweep and Random Pulse Sweep

6253 DC Voltage Current Source/Monitor Operation Manual
4.2.3 Operations in Sweep Source Mode
4-21
4.2.3.3 Random Sweep and Random Pulse Sweep
The random sweep function generates the source values stored in the memory from the specified start
address to the stop address.
Function waveforms also can be generated by setting arbitral values in the memory.
As the random pulse sweep function shares this memory, whether to generate DC waveforms or pulse
waveforms is selectable. Figure 4-8 below shows this relation.
Address 0 to address 19999 are available for the voltage and current functions respectively in the memory.
Figure 4-8 Random Sweep and Random Pulse Sweep
Stored for the
voltage and current
functions separately
Random sweep
Random pulse sweep
Current
source
value
Start address
Stop address
Voltage
source
value
Address
Address
Storing source
value