6253 DC Voltage Current Source/Monitor Operation Manual
1.6 Cleaning, Storage, and Transport Methods
1-13
1.6 Cleaning, Storage, and Transport Methods
1.6.1 Cleaning
Clean the 6253 by wiping or brushing its surface with a soft cloth or cloth which has been dampened in
water containing a mild detergent.
CAUTION:
1. Ensure that water does not penetrate the 6253.
2. Avoid using organic solvents such as benzene, toluene, xylene, acetone, etc. They will
cause deformation of the plastic parts.
1.6.2 Storage
Store the 6253 in a location where the temperature is within the range of -25 C to +70 C. If storing for
an extended period, or 90 days or longer, place the 6253 in a moisture-proof bag together with a desiccant.
Avoid storing the 6253 in a location where there is a lot of dust or where it will be subjected to direct
sunlight.
1.6.3 Transport
To transport the 6253, use the original box that it came in. If the box is not available any longer, pack the
6253 in accordance with the following guidelines.
Packing procedure
1. Prepare a corrugated cardboard box with dimensions that are larger than the
external dimensions of the 6253 by 15 cm or more to allow for shock absorbent
material.
2. Wrap the 6253 with a protective sheet.
3. Line the box with shock absorbing material so that the 6253 is protected on all
sides by cushioning material.
4. Close the box with industrial staples or use packing tape.
When sending the 6253 to an ADC CORPORATION sales representative for service or repairs, attach a
label stating the following items.
• Company name and address
• Name of the person in charge
• Serial number (shown on the rear panel)
• Type of service required
To Next Page
Loading...
