ADCMT 6253 - Optional Accessories; Optional Accessory List

6253 DC Voltage Current Source/Monitor Operation Manual
1.3 Optional Accessories
1-4
1.3 Optional Accessories
The 6253 optional accessories are listed below. Specify the part number when ordering.
Table 1-2 Optional Accessory List
Name Part number Remarks
Test fixture 12701A
Connecting cable A01041 Input cable (test probe)
A01044 Input and output cable (safety plug)
A08531 Banana tip adapter (for A01044)
A08532 Alligator clip adapter (for A01044)
A01047-01 Input and output cable (banana-banana, 4-wire shielded, 0.5 m)
A01047-02 Input and output cable (banana-banana, 4-wire shielded, 1 m)
A01047-03 Input and output cable (banana-banana, 4-wire shielded, 1.5 m)
A01047-04 Input and output cable (banana-banana, 4-wire shielded, 2 m)
A01038-100 Input and output cable (banana-banana, 4-wire shielded with
guard, 1 m)
CC060001-100 Input and output cable with 5-pin plug and alligator clip (1 m)
CC060002-200 Input and output cable with 5-pin plug (2 m)
A01036-1500 Input cable (BNC-BNC, 1.5 m)
Rack mount set A02269 Rack mount set (JIS 4U single)
CC022004 Rack mount set (JIS 4U twin)
*1
A02469 Rack mount set (EIA 4U single)
CC024004 Rack mount set (EIA 4U twin)
*1
Side joint set A02641 4U twin
Slide rail set A02615
Front handle set CC028004 Front handle set (4U)
*1 : Installing a rack or the slide rail set (A02615) is required.
The side joint set (A02641) is required.