ADCMT 6253 - Displaying and Outputting of Limit Detection

6253 DC Voltage Current Source/Monitor Operation Manual
4.2.6 Limit (Compliance)
4-43
4.2.6.3 Displaying and Outputting of Limit Detection
Four indicators, HLMT, LLMT, ▲, and ▼ are used for displaying the limit detection.
HLMT and LLMT indicate that measured data is obtained in the limit detection status.
▲ and ▼ indicate that the limit is currently being activated.
The following table shows a relation between limit detection display, remote output and buzzer.
Display
Remote output
Buzzer
Sub header Status
HLMT, LLMT Yes No N o
,
No Yes Yes