ADCMT 6253 - Connections for Calibration

6253 DC Voltage Current Source/Monitor Operation Manual
7.3 Connections
7-3
7.3 Connections
The following figure shows connections for calibrating the 6253 using the 7481 or 6581.
Figure 7-1 Connections for Calibration
(a) Checking and calibrating voltage source measurement
(b) Checking and calibrating current source measurement (3 A to 300 mA range)
7481 or 6581
6253
6253
7481 or 6581
(c) Checking and calibrating current source measurement (2 A range)
6253
7481 or 6581
Standard resistor (100 m)