6253 DC Voltage Current Source/Monitor Operation Manual
3.2.2 SHIFT Key (Shift Mode)
3-15
3.2.2 SHIFT Key (Shift Mode)
In the shift mode, the SHIFT key is lit and the blue characters on the panel are enabled.
Press the SHIFT key again to release the shift mode and turn OFF the SHIFT key.
3.2.3 Soft Keys
The soft keys are used to select the displayed items on the lower side of the screen.
The displayed parameters vary according to the selected item.
For more information on the soft keys, refer to Section 2.3, “Soft Keys.”
3.2.4 Keys (Right and Left Keys)
The Keys are used to move the cursor position for numerical input.
3.2.5 ENTER Key
The ENTER key is used to confirm input numbers or selected items.
3.2.6 EXIT Key/LOCAL Key
EXIT key: Cancels selected items.
Returns to the previous value and releases the edit status.
On the MENU layer, the display moves to the upper level.
LOCAL key: Enters the local operation status.
The RMT indicator goes OFF and remote control switches to panel operation.
To Next Page
Loading...