ADCMT 6253 - Operations in Pulse Source Mode

6253 DC Voltage Current Source/Monitor Operation Manual
4.2.2 Operations in Pulse Source Mode
4-11
4.2.2 Operations in Pulse Source Mode
The following table shows operations in the pulse source mode.
Table 4-2 Operations in Pulse Source Mode (1 of 2)
Operational
condition
Trigger
mode
Description Operation Remarks
Operate
ON
AUTO Executes
continuous
measurement
with the setting
period time Tp.
Tp: Period time
Td: Measurement delay
time
Tds: Source delay time
Tw: Pulse width
Tm: Measurement time
(Integration time +
Measurement data
processing time)
Tcn: Operate processing time
Trc: Range change
processing time
HOLD Executes
measurement
after trigger
input.
Standby
Operate
Standby
Operate
Measurement trigger