6253 DC Voltage Current Source/Monitor Operation Manual
1. PREFACE
1-1
1. PREFACE
This chapter describes the accessories, operating environment, precautions, and operating check for
personnel who operate the 6253. Read through this manual before using the 6253.
1.1 Product Overview
The 6253 is a DC Voltage Current Source/Monitor that offers high sensitivity with 5
1
/
2
-digit source
resolution and 6
1
/
2
-digit measurement resolution, as well as various sweep functions and a pulse source
function with a minimum pulse width of 25 s. It can be widely used as power source for evaluating
semiconductors and electronic components in research and development and as power source for
characteristic evaluation systems.
The 6253 characteristics are described below.
• Source and measurement 2 A at 32 V
1 A at 64 V
0.5 A at 110 V
See Figure 1-1, “Output Range.”
• Voltage source/measurement range 300 mV to 100 V
• Current source/measurement range 3 A to 2 A
• Display digits Source: 5
1
/
2
Measurement: 6
1
/
2
• Voltage resolution Source: 5 V Measurement: 100 nV
• Current resolution Source: 50 pA Measurement: 1 pA
• Voltage source current measurement (VSIM)/Current source voltage measurement (ISVM)
• Voltage source voltage measurement (VSVM)/Current source current measurement (ISIM)
• Monitors source values of DC voltage or current.
(Measured separately from the measurement function)
• Sink-enabled bipolar output
• Minimum pulse width 25 s
• Linear, fixed, random, multi-slope linear and log sweep functions for characteristic test
• Detection functions such as limit (compliance), oscillation, overload, and overheat
• Synchronized operation function by combining two or more 6253 units
• USB and GPIB as standard and optionally LAN and RS232 available
• Improved operability with a color display and a numeric keypad
To Next Page
Loading...
