ADCMT 6253 - Front and Rear Panels; Panel and Operation

6253 DC Voltage Current Source/Monitor Operation Manual
2. PANEL AND OPERATION
2-1
2. PANEL AND OPERATION
This chapter describes the part names on the panels and basic operations.
2.1 Front and Rear Panels
This section describes the part names and functions on the front and rear panels.
2.1.1 Front Panel
The front panel is described below.
Figure 2-1 Front Panel
1. POWER switch Turns ON or OFF the power.
2. Output terminal The output terminal is selectable between 2-wire connection and
4-wire connection.
For more information, refer to Section 4.1.1, “Output Terminals
(Front and Rear Output Terminals).”
CAUTION: To prevent damage to the 6253, do not apply a
voltage or current that exceeds the specified
range.
1
3
4
5
2