Agilent Technologies 1290 Infinity II 2D-LC User Manual

6 Method Parameters
Set the 2D-LC Method parameters
2D-LC User Guide 134
2 In the Sampling Table click in the Parameter cell.
Table 10 Sampling table description
Type Description
Time Defines the start time of the cut.
Function Defines the mode of sampling.
To select an alternative mode, click the
down-arrow:
• Time-Based Heart-Cuting
Define a time-based Heart-cutting run (MHC
or HiRes) in the sampling table.
• Time-Based Comprehensive
Define a time-based Comprehensive run
(LCxLC) in the sampling table.
• Start Peak-based
Define the Start time of a Peak-based
Heart-cutting run (MHC or HiRes) in the
sampling table. A bracket appears in the
preview which marks the Start time of the
peak-based area.
• End Peak-based
Define the End time of a Peak-based
Heart-cutting run (MHC or HiRes) in the
sampling table. A bracket appears in the
preview which marks the End time of the
peak-based area.
NOTE
The selected function in the Sampling Table
must match to the 2D-LC Operation mode
(Heart-cutting or Comprehensive) to avoid any
conflict.

Agilent Technologies 1290 Infinity II 2D-LC Specifications

General

Brand	Agilent Technologies
Model	1290 Infinity II 2D-LC
Category	Measuring Instruments
Language	English