12 Maintenance
Cleaning the Module
2D-LC User Guide 322
Cleaning the Module
To keep the module case clean, use a soft cloth slightly dampened with water, or
a solution of water and mild detergent. Avoid using organic solvents for cleaning
purposes. They can cause damage to plastic parts.
Liquid dripping into the electronic compartment of your module can cause
shock hazard and damage the module
Do not use an excessively damp cloth during cleaning.
Drain all solvent lines before opening any connections in the flow path.
A solution of 70 % isopropanol and 30 % water might be used if the surface of the
module needs to be disinfected.
To Next Page
Loading...
