15 Appendix
General Safety Information
2D-LC User Guide 384
Before Applying Power
Ground the Instrument
Wrong voltage range, frequency or cabling
Personal injury or damage to the instrument
Verify that the voltage range and frequency of your power distribution
matches to the power specification of the individual instrument.
Never use cables other than the ones supplied by Agilent Technologies
to ensure proper functionality and compliance with safety or EMC
regulations.
Make all connections to the unit before applying power.
Note the instrument's external markings described under “Safety Symbols” on
page 387.
Missing electrical ground
Electrical shock
If your product is provided with a grounding type power plug, the
instrument chassis and cover must be connected to an electrical ground
to minimize shock hazard.
The ground pin must be firmly connected to an electrical ground (safety
ground) terminal at the power outlet. Any interruption of the protective
(grounding) conductor or disconnection of the protective earth terminal
will cause a potential shock hazard that could result in personal injury.
To Next Page
Loading...
Need help?
General
