2D-LC User Guide 245
9 Data Analysis
2D-LC Data Analysis/Data Evaluation for MassHunter
4 You may want to repeat with 2D-LC Cut Marker, which gives an indication
when each cut has been analyzed.
Figure 121 Extract Chromatograms 2DLC:Cut marker in 2D
This cannot be automated because the name of the DAD trace has the cut # in it;
thus cut #3 does not contain any data with a name of cut #2
Cut markers in
1
D shows the time when the cut was made. Cut markers in
2
D
only makes sense, if you keep the retention time of each cut in method editor
settings. Then you can verify which cut belongs to which chromatogram.
To Next Page
Loading...
Need help?
General
