Agilent 4150 TapeStation System Manual 13
Safety
1
General Safety Information
General Safety Information
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the instrument. Agilent
Technologies assumes no liability for the customer’s failure to comply with
these requirements.
Ensure the proper usage of the equipment.
The protection provided by the equipment may be impaired.
➔ The operator of this instrument is advised to use the equipment in a manner as
specified in this manual.
Wrong voltage range, frequency or cabling
Personal injury or damage to the instrument
➔ Verify that the voltage range and frequency of your power distribution matches to
the power specification of the individual instrument.
➔ Never use cables other than the ones supplied by Agilent Technologies to ensure
proper functionality and compliance with safety or EMC regulations.
➔ Make all connections to the unit before applying power.
To Next Page
Loading...
Need help?
General
