Agilent Technologies 4150 TapeStation system User Manual

168 Agilent 4150 TapeStation System Manual
10 Troubleshooting
Software Messages
Camera Fault Detected
1 The TapeStation Controller software could not connect to the instruments'
camera. Check USB connection to the instrument, power-cycle the
instrument and restart the software. In case of recurrence reboot the
laptop. See “Instrument Communication” on page 212 for details.

Agilent Technologies 4150 TapeStation system Specifications

General

Brand	Agilent Technologies
Model	4150 TapeStation system
Category	Laboratory Equipment
Language	English