36 Agilent 4150 TapeStation System Manual
4
Installation
Bench Space Required
Bench Space Required
Identify the laboratory bench space based on the specifications table (see
Table 2 on page 32).
Pay special attention to the total height and total weight requirements for all
system components you have ordered. Also pay special attention to the total
weight of the modules you have ordered to ensure your laboratory bench can
support this weight. The work bench should be stable and vibration free.
Heavy weight
The instrument is heavy.
➔ Avoid back strain or injury by following all precautions for lifting heavy objects.
➔ Ensure that the load is as close to your body as possible.
➔ Ensure that you can cope with the weight of your load.
Condensation within the module
Condensation can damage the system electronics.
➔ Do not store, ship or use your module under conditions where temperature
fluctuations could cause condensation within the module.
➔ If your module was shipped in cold weather, leave it in its box and allow it to warm
slowly to room temperature to avoid condensation.
To Next Page
Loading...
Need help?
General
