Agilent Technologies 4150 TapeStation system - Page 46

46 Agilent 4150 TapeStation System Manual
4 Installation
Initial Setup of the System
1 Connect the instrument in the following order: 1. Power plug to power
socket, 2. USB-A to laptop, 3. USB-B to TapeStation instrument.
WARNING
Unintended use of power cords
Using power cords for unintended purposes can lead to personal injury or damage
of electronic equipment.
➔ Never use a power cord other than the one that Agilent shipped with this
instrument.
➔ Never use the power cords that Agilent Technologies supplies with this instrument
for any other equipment.
➔ Never use cables other than the ones supplied by Agilent Technologies to ensure
proper functionality and compliance with safety or EMC regulations.
WARNING
Absence of ground connection
The absence of ground connection can lead to electric shock or short circuit.
➔ Never operate your instrumentation from a power outlet that has no ground
connection.


