Agilent 4150 TapeStation System Manual 69
Operating Instructions
6
Preparing the Instrument
9 Place the first ScreenTape device into the ScreenTape nest. Make sure it is
horizontal within the nest and that the label faces toward the front.
10 The TapeStation Controller software interface will change and displays the
ScreenTape assay recognized. For details, see “TapeStation Controller
Software” on page 52.
11 Centrifuge samples to remove spills and air bubbles. For details, see
“Centrifugation Recommendations” on page 97.
This first ScreenTape device might be new or partially used with remaining lanes from
previous analysis on the same system. For details, see “Partially Used ScreenTape
Devices” on page 90.
To Next Page
Loading...
