Agilent Technologies 7673 - Number of Sample Prewashes

Standalone Control
Setting the run parameters
98
Number of sample prewashes
Set the number of sample washes to 0, 2, 6, or 10 sample washes per injection.
The following table shows the number of sample washes for each of the switch
settings.
Figure 56. Switches for setting the number of sample washes
Switch Setting
Both up
Left up, right down
Both down
Left down, right up
Number of Sample Washes
0
2
6
10
Set for six sample washes
sample
pre-wash
0
2
6
10