Preparing for Operation
Preparing sample vials
29
Figure 19 illustrates the recommended and minimum diameter for vial cap
apertures.
Figure 19. Specifications of vial cap aperture
Use amber glass vials for light-sensitive samples.
The last specification to consider is the total height of the capped vial.
Figure 20 illustrates the recommended maximum height of a crimp capped or
screw capped vial.
Figure 20. Maximum height of a vial with cap
Filling sample vials
Follow these recommendations to obtain reliable, high performance with the
sampler and prevent contamination or injection volume problems.
Recommended volumes for a maximum of five injections per vial are:
• 1 ml for the 2-ml vial
• 50 µl for the 100-µl vial
All dimensions in millimeters
5.58 (0.220 in.) recommended
4.65 (0.183 in.) minimum
To Next Page
Loading...
Need help?
General
