Preparing for Operation
Preparing sample vials
27
The location and thickness of a vial label can affect the delivery of the bottles
to and from the injector. Agilent Technologies recommends the position and
maximum label thickness shown in the following diagram.
Figure 17. Label specifications
Caution The correct sample vial dimensions are critical for proper operation. Vials that
do not meet specifications may cause sampler errors. Service calls and repairs
found to be due to vials and microvials that do not meet these specifications
are not covered under warranty or the service contract.
Specifications
Figure 18 illustrates most of the critical dimensions for the sample vials and
microvial inserts. These dimensions do not make up a complete set of
.2
.44
No label
5.6 0.6
20.5 1.0
No label
All measurements in millimeters
To Next Page
Loading...
Need help?
General
