Preventive Maintenance and Troubleshooting
Error messages
145
Error messages
This section is an alphabetical listing of possible error messages.
BOTTLE NOT FOUND
• The gripper did not find a sample vial in the injector turret during a
removal attempt.
DOWNLOAD NOT COMPLETE FILE TOO LONG
• The method file is too long.
DOWNLOAD NOT COMPLETE INVALID PARAMETER
• The value of a run parameter is not within the legal limit. Check the run
parameters.
DOWNLOAD NOT COMPLETE CONFIGURATION ERROR
• The method parameters do not match the installed software or hardware.
FRONT INJECTOR COMMUNICATIONS ERROR
• There is a communications error between the front injector and the
controller.
FRONT INJECTOR SYRINGE ERROR
• Go to page 135.
FRONT INJECTOR TURRET ERROR
• Go to page 136.
FRONT INJECTOR PLUNGER ERROR
• Go to page 137.
FRONT INJECTOR INCOMPLETE INJECTION
• Go to page 138.
FRONT INJECTOR MEMORY ERROR
• There is an electronics hardware problem. Obtain Agilent service.
To Next Page