Preventive Maintenance and Troubleshooting
Error messages
146
FRONT INJECTOR RESET
• There is an interruption in the
±18 V from the controller. Obtain Agilent
service.
FRONT INJECTOR DOOR OPEN/NOT MOUNTED
• Go to page 134.
REAR INJECTOR COMMUNICATIONS ERROR
• There is a communications error between the rear injector and the
controller.
REAR INJECTOR SYRINGE ERROR
• Go to page 135.
REAR INJECTOR TURRET ERROR
• Go to page 136.
REAR INJECTOR PLUNGER ERROR
• Go to page 137.
REAR INJECTOR INCOMPLETE INJECTION
• Go to page 138.
REAR INJECTOR MEMORY ERROR
• There is an electronics hardware problem. Obtain Agilent service.
REAR INJECTOR RESET
• There is an interruption in the
±18 V from the controller. Obtain Agilent
service.
To Next Page