Agilent Technologies 7673 User Manual

Setting Up
Installing the controller
21
Table 3. Possible GPIB Address Switch Settings
Connecting the injector cables
With the power off, plug each injector cable into the connector on the back
panel of the controller associated with the position of the injector, front or
GPIB Address
Switch
Settings GPIB Address
Switch
Settings
0 00000 15 01111
1 00001 16 10000
2 00010 17 10001
3 00011 18 10010
4 00100 19 10011
5 00101 20 10100
6 00110 21 10101
7 00111 22 10110
8 01000 23 10111
9 01001 24 11000
10 01010 25 11001
11 01011 26 11010
12 01100 27 11011
13 01101 28 11100
14 01110 29 11101

Agilent Technologies 7673 Specifications

General

Brand	Agilent Technologies
Model	7673
Category	Laboratory Equipment
Language	English