Chapter 4 287
Key Function Descriptions
Key Descriptions
VIEW TBL TRCE Sets the display mode for an adjacent channel power
measurement to show a table (TBL) of the
measurement results or to show a representative
spectrum trace (TRCE). The trace option is not
available when using the burst power measurement
method. The trace option is also not available when
using acceleration with any of the methods except the
analog method.
Front-panel key access:
MEAS/USER
VOLTS Selects volts as the display amplitude units.
Front-panel key access:
AMPLITUDE
WATTS Selects watts as the display amplitude units.
Front-panel key access:
AMPLITUDE
WEIGHT α Allows you to enter the "alpha" factor of the
root-raised-cosine weighting function. The current
value is displayed on the softkey.
Front-panel key access:
MEAS/USER
WEIGHT T Allows you to enter the "T" factor of the
root-raised-cosine filter function. The current value is
displayed on the softkey.
Front-panel key access:
MEAS/USER
To Next Page
Loading...
Need help?
General
