Chapter 7 403
Language Reference
ACPSP Adjacent Channel Power Channel Spacing
ACPSP Adjacent Channel Power Channel
Spacing
Syntax
Figure 7-34 ACPSP Syntax
Description
The ACPSP command sets channel spacing as the active function for
the ACPMEAS and ACPCOMPUTE commands. The spacing is set
between a minimum of 100 Hz to a maximum of 50 GHz. The query
returns the channel spacing in hertz. The channel bandwidth cannot be
more than twice the channel spacing, to make a valid measurement.
The channel bandwidth is normally less than or equal to the channel
spacing. Typical channel spacing/channel bandwidth values used for
standards for analog FM radios include the following:
Channel Spacing Channel Bandwidth
12.5 kHz 8.5 kHz
20.0 kHz 14.0 kHz
25.0 kHz 16.0 kHz
To Next Page
Loading...
Need help?
General
