370 Chapter7
Language Reference
Language Reference Features
Language Reference Features
This chapter contains complete information for the programming
commands available to operate an 8560 E-Series or EC-Series spectrum
analyzer.
Cross-reference information for the softkeys and programming
commands are supplied in Chapter 6. The commands available when
using the mass memory module with the spectrum analyzer are listed
in Table 6-4 on page 365.
• Syntax Diagram Conventions describes the pictorial notation
that represents the proper syntax for each command.
• Syntax Elements are listed in Table 7-1 on page 372.
• Secondary Keywords and Characters (Reserved Words) used by
the programming commands are listed in Table 7-1 on page 372.
• Programming commands are listed in alphabetical order
according to their mnemonic, followed by a complete description of
their syntax, parameters, and function.
If using languages other than Rocky Mountain Basic (HP Basic), the
information within quotes in the examples can be used with IBREAD
and IBWRITE. For example, 718;”ACPWRTX?;” can be written as
IBWRITE (address, command string, error string).
To Next Page
Loading...
Need help?
General
