Chapter 7 537
Language Reference
MKSS Marker to Center Frequency Step-Size
MKSS Marker to Center Frequency Step-Size
Syntax
Figure 7-184 MKSS Syntax
Description
The MKSS command sets the center frequency step-size equal to the
frequency value of the active marker.
Example
10 INPUT "CONNECT THE 300 MHZ CALIBRATOR TO THE INPUT",An
s$
20 OUTPUT 718;"IP;SNGLS;CF 300MHZ;SP 20MHZ;TS;"
30 OUTPUT 718;"MKPK HI;MKSS;MKD;CF UP;TS;MKPK HI;"
40 OUTPUT 718;"MKA?;"
50 ENTER 718;Delta_amplitude
60 OUTPUT 718;"MKF?;"
70 ENTER 718;Delta_freq
80 PRINT "DIFFERENCE IN AMPLITUDE IS",Delta_amplitude,"DB
"
90 PRINT "DIFFERENCE IN FREQUENCY IS ",Delta_freq,"HZ"
100 END
To Next Page
Loading...
Need help?
General
