382 Chapter7
Language Reference
ACPBRPER Adjacent Channel Power Burst Period
ACPBRPER Adjacent Channel Power Burst
Period
Syntax
Figure 7-10 ACPBRPER Syntax
Description
The ACPBRPER command sets the cycle time (period) of the burst RF
signal. The cycle time is needed to set the sweep times when using the
peak, two bandwidth, burst power, and gated methods for adjacent
channel power measurements.
Parameters
number 50 µs to 10 seconds
Query Response
Figure 7-11 ACPBRPER Query Response
Example
10 REAL Burstperiod
20 Burstwidth = 20.0
30 OUTPUT 718;"ACPBRWID";Burstwidth;"MS;";
To Next Page
Loading...
Need help?
General
