G4208A User’s Guide 146
5 Maintenance and Repair
Firmware Updates
Downgrade from B.xx to A.05.1x
1 When the Agilent 1100/1200 series modules are on a firmware platform
A.06.xx, downgrade the Instant Pilot to A.05.1x first.
During the downgrade process the screen is black.
2 After boot of the Instant Pilot,
• the Instant Pilot shows “Scanning System ...”
• the LAN/RS- 232 Update Tool 2.10 indicates “100% updated” but does not
display the result dialog.
3 Press Cancel (red cross button) on the LAN/RS- 232 Update Tool 2.10 to stop
the Update process.
The Instant Pilot is no longer listed in the tree view of the Update Tool.
4 Downgrade all 1100/1200 modules together to the target firmware
(A.05.11/13 or A.05.09/10).
When finished,
• the LAN/RS- 232 Update Tool 2.10 shows all 1100/1200 modules without
the Instant Pilot.
• the Instant Pilot shows all modules of the system in the Welcome screen.
5 Close the connection and the LAN/RS- 232 Update Tool 2.10.
To Next Page
Loading...
Need help?
General
