Configuring the Heartstream XL
M4735A Heartstream XL Defibrillator/Monitor 10-11
10
* If (XURSHDQ3URWRFRO is set to 2II, the Pause Timer is used during the Pause state
and appears as a configurable parameter. If (XURSHDQ3URWR FROis set to 2Q, either
the 3 RVW6KRFN&357LPHU or the 16$7LPHU are used during the Pause state and
appear as configurable parameters in place of 3DXVH7LPHU.
127( If (XURSHDQ3URWRFRO is set to 2Q, the setting for the 6KRFN6HULHV7LPHU must be <
3RVW6KRFN&357LPHU <
16$7LPHU. Also, the 6KRFN6HULHV7LPHU can not be config-
ured to either 2II or .
3DXVH7LPHU Defines the duration of the pause time (in sec-
onds), when is pressed (when (XU RSHDQ
3URWRFRO is set to Off). Appears only when
European Protocol is configured off. Pause
Timer is the default.
30, 60, 120,
180
(XURSHDQ3URWRFRO Modifies Pause state prompts and replaces
the Pause Timer with either the Post Shock
CPR Timer or the "NSA" Timer, depending
on the event preceding the Pause state.
Off/On
3RVW6KRFN&35
7LPHU
Appears only when European Protocol is on.
Defines the duration of the Pause time (in sec-
onds) when is pressed and the time
since the last shock is less than or equal to the
6KRFN 6HULHV7LPHU setting - typically at the com-
pletion of a shock series.
30, 60, 120,
180
16$7LPHU Appears only when European Protocol is on.
Defines the duration of the Pause time (in sec-
onds) when is pressed. Also defines
the time since the last shock is greater than the
6KRFN 6HULHV 7LPHU setting when 1R6KR FN $ GYLVHG
30, 60, 120,
180
7DEOH$('6HWWLQJV
Parameter Description
Setting
Choices
3$86(
3$86(
3$86(
To Next Page
Loading...
Need help?
General
