Getting Acquainted
2-4 Getting Started
Defibrillation Controls
Defibrillation controls consist of an energy select knob and a set of softkeys
that perform the function displayed as a label above each button. These
controls assist in both AED and Manual Mode defibrillation.
Audiovisual Controls
To completely turn the QRS beeper off, it must be changed from the configu-
ration menu.
Monitoring Controls
Monitoring controls consist of a set of softkeys that perform monitoring
functionality. These functions are displayed in the softkey label below each
button. Monitoring softkeys also control heart rate and SpO
2
alarms, and
selection of the ECG source to monitor.
Adjusts the volume of voice prompts and the QRS beeper.
Adjusts the size of the ECG waveform displayed, printed, and
stored. Pressing and simultaneously generates a
1 mV calibration pulse.
To Next Page
Loading...
