146 Agilent X-Series Signal Generators User’s Guide
Basic Digital Operation (Option 653/655/656/657)
Waveform File Basics
Waveform File Basics
There are two types of waveform files:
•A segment is a waveform file that you download to the signal generator.
For information on creating and downloading waveform files, refer to the Programming Guide.
•A sequence is a file you create in the signal generator that contains pointers to one or more
waveform files (segments, other sequences, or both).
For information on creating sequences, see page 151.
Signal Generator Memory
The signal generator has two types of memory:
• Volatile memory, baseband generator (BBG) media, where waveform files are played from or
edited.
• Non–volatile memory, either internal (int) or external (USB) media, where waveform files are
stored.
Dual ARB Player
NOTE The MXG/EXG’s ARB Waveform File Cache is limited to 128 files. Consequently, once the 128
file cache limit has been reached, the waveform switching speed will be much slower for
additional files loaded into the volatile waveform memory (BBG).
The dual ARB waveform player enables you to play, rename, delete, store, and load (external or
internal) waveform files in addition to building waveform sequences. The dual ARB waveform player
also provides markers (page 161), triggering (page 178), clipping (page 185), and scaling (page 194)
capabilities.
Most procedures in this section start from the Dual ARB menu, shown below.
To Next Page
Loading...
Need help?
General
