Agilent X-Series Signal Generators User’s Guide 85
5 Optimizing Performance
Before using this information, you should be familiar with the basic operation of the signal generator.
If you are not comfortable with functions such as setting the power level and frequency, refer to
Chapter 3, “Basic Operation,” on page 43 and familiarize yourself with the information in that
chapter.
• Using the Dual Power Meter Display on page 86
• Using the Power Meter Servo on page 94
• Using Flatness Correction on page 97
• Using Internal Channel Correction (N5172B/82B Only) on page 106
• Using External Leveling (N5173B/83B Only) on page 110
• Using Unleveled Operating Modes on page 118
• Using an Output Offset, Reference, or Multiplier on page 122
• Using Free Run, Step Dwell, and Timer Trigger on page 126
• Using a USB Keyboard on page 128
To Next Page
Loading...
Need help?
General
