Agilent X-Series Signal Generators User’s Guide 43
3 Basic Operation
This chapter introduces fundamental front panel operation. For information on remote operation,
refer to the Programming Guide.
• Presetting the Signal Generator on page 44
• Viewing Key Descriptions on page 44
• Entering and Editing Numbers and Text on page 45
• Setting Frequency and Power (Amplitude) on page 47
• Setting ALC Bandwidth Control on page 49
• Configuring a Swept Output on page 50
• Modulating the Carrier Signal on page 59
• Working with Files on page 61
• Reading Error Messages on page 73
To Next Page
Loading...
Need help?
General
