Agilent X-Series Signal Generators User’s Guide 309
12 Real–Time Phase Noise Impairments (Option 432)
Before using this information, you should be familiar with the basic operation of the signal generator.
If you are not comfortable with functions such as setting the power level and frequency, refer to
Chapter 3, “Basic Operation,” on page 43 and familiarize yourself with the information in that
chapter.
This feature is available only in Agilent X- Series vector signal generators with Option 431. Option 431
requires Option 653 or 655 (N5172B) or Option 656 or 657 (N5182B).
This chapter contains the softkey maps to locate the Phase Noise Impairment option functions and
information on the use of this feature.
• Real–Time Phase Noise Impairment on page 310
• The Agilent X- Series Phase Noise Shape and Additive Phase Noise Impairments on page 311
• Understanding the Phase Noise Adjustments on page 313
• DAC Over–Range Conditions and Scaling on page 314
To Next Page
Loading...
