380 Agilent X-Series Signal Generators User’s Guide
Working in a Secure Environment
Using Secure Display
Using Secure Display
This function prevents unauthorized personnel from reading the instrument display or tampering with
the current configuration via the front panel. When Secure Display is active, the display is blank,
except for an advisory message, as shown in Figure 15- 1 below. All front panel keys are disabled.
To set Secure Display, press: Utility > Display > More > Activate Secure Display > Confirm Secure Display.
Once Secure Display has been activated, the power must be cycled to re- enable the display and front
panel keys.
Figure 15-1 Signal Generator Screen with Secure Display Activated
To Next Page
Loading...
Need help?
General
