page 33
page 34
NOTES
USB is also available. It is not shown in the menu because it requires no configuration.
For details on using the instrument remotely, see the Programming Guide.
Select the desired language.
This setting is not persistent and is cleared by performing an
instrument Preset. In most cases, it is best to use Utility >
Power On/Preset > Language for a permanent language
change. See page 35.
For details on each key, use key help as described on page 44.
Select On to view the associated SCPI command for a key press.
Select On to place a copy of every subsequent SCPI command
executed in the log.
Select Off to stop logging. Selecting Off does not clear the log.
Press the Clear SCPI Log softkey to clear the log.
To Next Page
Loading...
Need help?
General
