page 323
page 353
Mode > Real-Time Custom Modulation > Modulation Setup
page 325
This softkey label shows
the currently selected
modulation
Press Symbol Rate
softkey and use
numeric keypad to
change value as
required.
The default (initial)
Symbol Rate
maximum range value
is dependent upon the
modulation standard
selected with the
Quick Setup softkey.
When one of these pre–defined
modulation standards is selected,
default values for components of the
setup (including filter, symbol rate, and
modulation type) are automatically
specified.
For details on each key, use key help as described on page 44.
To Next Page
Loading...
Need help?
General
