Alcatel-Lucent 7210 SAS M - Page 178

Configuring a VLL Service with CLI
Page 178 7210 SAS M Services Guide
Configuring a Channel Group
The following displays an example of a DS1 channel group configured for CES.
*A:ces-A>config>port# info
----------------------------------------------
tdm
ds1
framing ds1-unframed
clock-source adaptive
report-alarm looped
channel-group 1
no shutdown
exit
no shutdown
exit
exit
no shutdown
----------------------------------------------
*A:ces-A>config>port#
*A:ces-A>config>port# info detail
----------------------------------------------
description "DS1/E1"
tdm
buildout short
length 133
ds1
framing ds1-unframed
no loopback
clock-source adaptive
report-alarm ais los
no report-alarm oof rai looped
channel-group 1
description "DS0GRP"
mode access
encap-type cem
timeslots 1-24
idle-payload-fill all-ones
no shutdown
exit
no shutdown
exit
line-impedance 100
exit
no shutdown
----------------------------------------------