EasyManuals Logo

Alcatel-Lucent 7210 SAS M Service Guide

Alcatel-Lucent 7210 SAS M
952 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #284 background imageLoading...
Page #284 background image
VPLS Features
Page 284 7210 SAS M Services Guide
The draft definition message is currently used in management VPLS which is using RSTP for
recovering from failures in Layer 2 topologies. The mechanism described in this document
represent an alternative solution.
The advantage of this approach (as compared to RSTP based methods) is that only MAC-affected
addresses are flushed and not the full forwarding database. While this method does not provide a
mechanism to secure alternative loop-free topology, the convergence time is dependent on the
speed of the given CE device will open alternative link (L2-B switch in Figure 46) as well as on
the speed PE routers will flush their FDB.
In addition, this mechanism is effective only if PE and CE are directly connected (no hub or
bridge) as it reacts to physical failure of the link.

Table of Contents

Other manuals for Alcatel-Lucent 7210 SAS M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent 7210 SAS M and is the answer not in the manual?

Alcatel-Lucent 7210 SAS M Specifications

General IconGeneral
BrandAlcatel-Lucent
Model7210 SAS M
CategorySwitch
LanguageEnglish

Related product manuals