Service Entities
Page 40 7210 SAS M Services Guide
processed by this SAP. The Default QinQ SAP cannot process un-tagged packets, even if
0.* SAP is not configured for use on that port.
•The Default QinQ SAPs is available for use with 0.* SAPs configured on the same port
or in the same service. It is available for use with another default QinQ SAP configured in
the same service (on a different port).In a VPLS service, the Default QinQ SAP is
available for use with any other SAP type configured in a service configured with svc-
sap-type parameter set to "null-star".
→ SAPs using connection-profile (to specify dot1q VLAN ranges or individual VLAN
IDs) can be configured in a service only when svc-sap-type is set to 'dot1q-range'.
→ When a service is configured to use svc-sap-type 'dot1q-range', the outermost V-LAN
tag of the packets are not stripped when the packet is received on access port ingress.
For more information, see “Ethernet Pipe (Epipe) Services on page 136” chapter for
processing behavior for this type of service.
To Next Page
Loading...
Need help?
General
