PBB Show Commands
7210-SAS M Services Guide Page 495
Description This command enables STP debugging for FSM timer changes.
port-role
Syntax [no] port-role
Context debug>service>id>stp
Description his command enables STP debugging for changes in port roles.
port-state
Syntax [no] port-state
Context debug>service>id>stp
Description his command enables STP debugging for port states.
sap
Syntax [no] sap sap-id
Context debug>service>id>stp
Description This command enables STP debugging for a specific SAP.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition.