VPRN Service Configuration Commands
Page 598 7210 SAS M Services Guide
Values 1 — 2147483647
auto-bind
Syntax auto-bind {ldp | rsvp-te | mpls}
no auto-bind
Context config>service>vprn
Description This command specifies the automatic binding type for the SDP assigned to this service.
Default None — The auto-bind type must be explicitly specified.
Parameters ldp — Specifies LDP to be the automatic binding for the SDP assigned to the service.
rsvp-te — Specifies RSVP-TE to be the automatic binding for the SDP assigned to the service
mpls — Specifies that both LDP and RSVP-TE can be used to resolve the BGP nexthop for VPRN
routes in an associated VPRN instance.
autonomous-system
Syntax autonomous-system as-number
no autonomous-system
Context config>service>vprn
Description This command defines the autonomous system (AS) to be used by this VPN routing/forwarding
(VRF). This command defines the autonomous system to be used by this VPN routing
The no form of the command removes the defined AS from this VPRN context.
Default no autonomous-system
Parameters as-number — Specifies the AS number for the VPRN service.
Values 1 — 4294967295
export-limit
Syntax export-limit num-routes
no export-limit
Context config>service>vprn>grt-lookup
Description This command provides the ability to limit the total number of routes exported from the VRF to the
GRT. The value zero (0) provides an override that disables the maximum limit. Setting this value to
zero (0) will not limit the number of routes exported from the VRF to the GRT. Configuring a range of
one (1) to 1000 will limit the number of routes to the specified value.
The no form of the command sets the export-limit to a default of five (5).
To Next Page
Loading...
Need help?
General
