Alcatel-Lucent 7210 SAS M Service Guide

VPRN Service Configuration Commands
Page 626 7210 SAS M Services Guide
VPRN SAP; packets that are routed will be processed using the policy defined in the IP interface-
binding context.
By default, no specific QoS policy is associated with the SAP or IP interface for ingress or egress, so
the default QoS policy is used.
The no form of this command removes the QoS policy association from the SAP or IP interface, and
the QoS policy reverts to the default.
Parameters policy-id — The ingress/egress policy ID to associate with SAP or IP interface on ingress/egress. The
policy ID must already exist.
Values 1 — 65535

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English