EasyManua.ls Logo

Alcatel-Lucent 7210 SAS M - Page 629

Alcatel-Lucent 7210 SAS M
952 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Virtual Private Routed Network Services
7210 SAS M Services Guide Page 629
backup
Syntax [no] backup ip-address
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
Description This command configures virtual router IP addresses for the interface.
init-delay
Syntax init-delay seconds
no init-delay
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
Description This command configures a VRRP initialization delay timer.
Default no init-delay
Parameters seconds — Specifies the initialization delay timer for VRRP, in seconds.
Values 1 — 65535
mac
Syntax [no] mac ieee-mac-address
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
Description This command assigns a specific MAC address to an IP interface.
The no form of this command returns the MAC address of the IP interface to the default value.
Default The physical MAC address associated with the Ethernet interface that the SAP is configured on.
Parameters ieee-mac-address — Specifies the 48-bit MAC address for the static ARP in the form
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
master-int-inherit
Syntax [no] master-int-inherit
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
Description This command allows the master instance to dictate the master down timer (non-owner context only).

Table of Contents

Other manuals for Alcatel-Lucent 7210 SAS M

Related product manuals