VPRN Service Configuration Commands
Page 646 7210 SAS M Services Guide
bootstrap-export
Syntax bootstrap-export policy-name [policy-name... up to five]
no bootstrap-export
Context config>service>vprn>pim>rp
Description This command exports policies to control the flow of bootstrap messages from the RP. Up to five
policies can be defined.
The no form of this command removes the specified policy names from the configuration.
Default none
Parameters policy-name — Specify the policy name. The policy statement must already be configured in the
config>router>policy-options context.
bootstrap-import
Syntax bootstrap-import policy-name [policy-name... up to five]
no bootstrap-import policy-name [policy-name... up to five]
Context config>service>vprn>pim>rp
Description This command imports policies to control the flow of bootstrap messages into the RP. Up to five
policies can be defined.
The no form of this command removes the specified policy names from the configuration.
Default none
Parameters policy-name — Specify the policy name. The policy statement must already be configured in the
config>router>policy-options context.
bsr-candidate
Syntax bsr-candidate
Context config>service>vprn>pim>rp
Description This command enables the context to configure a local rendezvous point (RP) of a PIM protocol
instance.
Default Enabled when PIM is enabled.
To Next Page
Loading...
