Virtual Private Routed Network Services
7210 SAS M Services Guide Page 651
spt-threshold — Specifies the configured threshold in kilo-bits per second(kbps) for the group to
which this (S,G) belongs. For a group G configured with a threshold, switchover to SPT for an
(S,G) is attempted only if the (S,G)'s rate exceeds this configured threshold.
ssm-groups
Syntax [no] ssm-groups
Context config>service>vprn
Description This command enables access to the context to enable a source-specific multicast (SSM)
configuration instance.
Default none
To Next Page
Loading...
Need help?
General
