Virtual Private Routed Network Services
7210 SAS M Services Guide Page 653
Counter Mode Commands
statistics
Syntax statistics
Context config>service>vprn>if>sap
Description This command enables the context to configure the counters associated with SAP ingress.
ingress
Syntax ingress
Context config>service>vprn>if>sap>statistics
Description This command enables the context to configure the ingress SAP statistics counter.
counter-mode
Syntax counter-mode {in-out-profile-count| forward-drop-count}
Context config>service>vprn>if>sap>statistics>ingress
Description This command allows the user to set the counter mode for the counters associated with sap ingress
meters or policers. A pair of counters is available with each meter. These counters count different
events based on the counter mode value.
Note: The counter mode can be changed if an accounting policy is associated with a SAP. If the
counter mode is changed the counters associated with the meter are reset and the counts are cleared. If
an accounting policy is in use when the counter-mode is changed a new record will be written into the
current accounting file.
Execute the following sequence of commands to ensure a new accounting file is generated when the
counter-mode is changed:
1. Execute the command config>service>epipe/vpls>sap> no collect-stats, to disable writing of
accounting records.
2. Change the counter-mode to the desired value, execute the command config>service>epipe/
vpls>sap>counter-mode {in-out-profile-count| forward-drop-count}.
3. Execute the command config>service>epipe/vpls>sap> collect-stats, to enable writing of
accounting records.
The no form of the command restores the counter mode to the default value.
Default in-out-profile-count
To Next Page
Loading...
