Alcatel-Lucent 7210 SAS M - Page 696

Show, Clear, Debug Commands
Page 696 7210 SAS M Services Guide
connection-profile
Syntax connection-profile [conn-prof-id] [associations]
Context show
Description This command displays connection profile information.
Parameters conn-prof-id — Specifies the connection profile ID.
Values 1 — 8000
associations — Displays the SAP and the service ID that use this connection profile.
Output The following table describes show connection-profile command output fields
Sample Output
Show output for connection-profile
*7210SAS>show# connection-profile
===============================================================================
Connection Profile Summary Information
===============================================================================
CP Index Number of HasRange
Members
-------------------------------------------------------------------------------
1 0 Yes
2 0 Yes
3 0 Yes
5 0 Yes
6 0 Yes
100 0 Yes
200 0 Yes
300 0 Yes
400 0 Yes
500 0 Yes
600 0 Yes
700 0 Yes
800 0 Yes
900 0 Yes
===============================================================================
*7210SAS>show#
Label Description
CP Index
Identifies the connection-profile.
Number of Members
Indicates the number of ATM connection profile members not
applicable for 7210.
HasRange
Indicates whether VLAN range is configured or not